Phoenix Electrical Problems Homeowners Deal with and What to do About Them

Homeownership comes with many obligations, tasks, and problems that need to be addressed, even though there are several advantages to being a homeowner. Many things might go wrong with a house that doesn’t require immediate repairs, such as gutters that need to be replaced or an air conditioner that needs to be tuned up. Putting things on the back burner for a couple of weeks isn’t normally harmful, even though repairing them sooner rather than later would undoubtedly assist prevent problems or more damage. On the other hand, issues with the electrical system could.

When you become aware of an electrical problem in your house, you cannot put off investigating until the following weekend; rather, you must quickly evaluate the current situation. This is because ignoring an electrical problem can result in severe repercussions, such as the destruction of high-priced equipment and appliances, potentially lethal electrical shocks, and even fires in the home. Our highly trained electricians at Add On Electric are here to assist you with any residential electrical issue you may be experiencing and offer guidance on preventing such difficulties in the future. Continue reading to learn about the house’s five most frequent electrical issues.

Is there something strange going on with the electrical wiring in your home? Please contact a reputable electrical contractor in Phoenix, like Add On Electric Phoenix, for an evaluation. Even if they cannot identify the problem, homeowners frequently sense when something is wrong with their homes. We are standing by to lend a hand.

Flickering Lights

The lights dimming or flickering sometimes is quite natural, but if it happens every day, there may be a problem. When you sit for dinner as a family in the evening, does the light hanging over the kitchen table flicker? Don’t worry; you haven’t (probably) angered the ghost in the attic; the flickering is most likely the result of an electrical problem. You need to begin by switching out the light bulb to determine whether this resolves the issue. If the flickering continues, it is possible that it is being caused by one of the following:

• Circuit overload. If you put in a new device and immediately notice that your lights are flickering, this might be a sign that your circuit is overloaded. The electrical circuits may need to be replaced or upgraded to solve the issue.
• Voltage change. The voltage in your home should have a range of anywhere between 115 and 125 volts. The possibility of your lights flickering arises whenever it moves outside of this range. A shift in voltage outside the typical range is hazardous and needs to be assessed by a specialist as soon as possible.
• Loose wiring. If the flickering problem has been worsening steadily, there is a good chance you are dealing with loose wiring. Loose wiring in any part of your home poses a fire risk and demands professional home wiring assistance immediately.

Contact Add On Electric if you are experiencing flickering lights and are unclear which of these issues is causing the problem or if you are confused about the problem. Problems with the circuitry, voltage, and wiring need to be evaluated by a qualified electrician. Add On Electric can repair flickering lights.

Tripped Breaker

Many contemporary technologies have high power requirements, which older homes were not meant to sustain because of their electrical infrastructure. Therefore, householders risk tripping the breaker when doing actions as simple as plugging in the microwave. Living in a house with restricted access to electricity is not desirable for most people, and the patchwork installations of extension cables and power strips necessary to alleviate the problem can bring additional safety risks. Find that you are routinely tripping the breaker in your house. You should probably consider contacting an electrical contractor in Albuquerque to service and repair your breaker panel.

Hot Outlets

When you try to disconnect a gadget, are you ever surprised to find that the power outlet is too hot to touch? This is not typical behavior, and it ought not to be disregarded because of that. A hot outlet may indicate defective wiring or other damage, which can have major repercussions and potentially spark a home fire if left unchecked. As soon as you discover a hot outlet, getting in touch with a qualified electrician for assistance is critical. They might decide to replace the outlet or at least a portion of the wire surrounding the outlet.

Plugs should not be able to easily remove themselves from your outlets if they are not loose. If they are, it indicates that the contacts within the outlet that are supposed to grab the prongs of the cord are no longer functioning as they should, and the outlet needs to be replaced. Although a device can continue to receive power even when it is only partially plugged in, this type of connection is not considered secure. You put yourself in danger of electrocution if your connections are not secure. Your best bet is to get in touch with an electrical contractor in Phoenix to handle the replacement of the outlet.

Lightbulbs That Have Gone Out

Every light bulb will someday stop working. On the other hand, if you find that your light bulbs are going out more frequently than usual, there is a significant possibility that you have an electrical problem. Burning out light bulbs can be caused by a wide variety of factors, including the following:

• An issue with the power supply. If the voltage is too high, the light bulb can be shattered.
• A connection to the bulb that is too slack. If a lightbulb does not screw in securely, there may be a problem with the connection in the socket.
• Loose wiring. The filament within the bulb can snap if the wire that supplies it is frayed or damaged.

Constantly blown-out lights are not only an annoyance but also a significant risk of fire for the location where they occur. Additionally, damaged bulbs pose a risk even when used by themselves. – When Should I Call an Electrician? – LED bulbs can contain dangerous substances such as arsenic and lead, which you don’t want all over your floor. This is especially important to remember if you have young children.

Problems such as improper wiring are responsible for over 51,000 fires yearly, in addition to almost 500 fatalities and more than 1,400 injuries. As soon as you become aware of these problems, you should get in touch with an electrician as quickly as possible, as they pose a considerable risk. Suppose you do not have prior expertise in the field of electrical work and do not intend to handle the problem immediately. In that case, it is strongly recommended that you contact a qualified professional electrician when you become aware of the frequent electrical problems mentioned above.

Get in touch with Add On Electric.

Are you experiencing issues with the electricity in your home? Instead of putting the well-being of your loved ones in jeopardy, call Add On Electric, an experienced and reputable electrical contractor in Phoenix. Since 2020, Add On Electric Phoenix has been happy to provide electrical services to the greater Phoenix metropolitan region. We have earned our community’s confidence by consistently delivering remarkable work, attention to our customer’s needs, and straightforward, reasonable pricing. When we undertake a job, we ensure that it is completed successfully on the very first attempt by adhering to the same high standards that we apply to our very own houses.

Add On Electric Phoenix can assist you with your electrical service needs, including house wiring, home safety, and electrical service needs. You may find out more about us by going to our website, and when you’re ready to make an appointment for service, give us a call at 602-980-8056.